2007 FINTEC 640 for sale in Palmer, MA
07 Fintec 640 Mobile Scalping Screen, Clean and ready to work, 1310 Hours on the original motor, Last Service was completed at 1270 Hrs, Self Greasing, All conveyors work great, all hydraulics and belts are in great shape, Great tracks, pins and sprockets (90%+) Starts on the 1st try, was used for screening millings. Feeder (Apron) - 35"W x 10' 10" L, Hardox steel apron. Variable speed conveyor with gearbox (16:1 ratio) and a 315cc hydraulic motor. Feeder ( Belt ) - 47"W x 10'10"L, 3 ply conveyor belt. Variable speed conveyor with gearbox (23:1 ratio) and a 125cc hydraulic motor. Oversize Conveyor - 47"W x 16'10"L, 3 ply conveyor belt. This conveyor is driven by a 800cc hydraulic motor. Side conveyor (Midsize) - 32"W x 25'8"L, 3-ply C15 chevron conveyor belt. Independent variably controlled conveyors driven by a 500cc hydraulic motor. Side conveyor (Fines) - 32"W x 25' 8"L, 3-ply conveyor belt. Independent variably controlled conveyors driven by a 500cc hydraulic motor.Transfer Conveyor- 47"W x 10' 8"L, 3-ply conveyor belt. This conveyor is driven by a 500cc hydraulic motor. They are all fitted with internal v-scrappers to protect the tail drums. Hopper- The feeder hopper has a nominal volume of 5m3 (6.6 yd3) and has foldable wing plates for transportation purposes.Screenbox- Top Deck 12' x 5". Bottom deck 11' x 5". The screen has a variable screening angle ranging from 12º to 20º, and quick release wedge tensioning system along the entire length of the top deck.Powerunit -Caterpillar 3054C turbo charged 4-cylinder diesel engine powerpack developing 99Hp at 2200 r.p.m. Fuel tank volume is 400 litres (105 USA Gallons) and fuel consumption is approximately 18L /hr at 75% continuous load. The engine meets EU emissions regulation 97/68/EC. Hydraulics -36cc/36cc/36cc triple pump bolts directly onto the engine flywheel. The engine also has a 23cc/23cc tandem pump fitted to a side P.T.O. The hydraulic tank capacity is 700 litres. Tracks -crawler tracks have a length of 9' 5" and track shoe width 20" the normal ground pressure is 87 kpa with a travelling speed of 1.0 km/h.Transport Width 9' 10")Height 10' 9" Length 41' 7"OperationalWidth 46' 10"Height 14' 1"Length 42' 9"Weight 29 tonnes (32.48 US Tonnes) -(approx.)The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
|